Model: 109019
IAT Extension 36" When installing aftermarket cold air intake in your vehicle, the inlet air temperature (air temp sensor / intake temp sensor) sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splic..
$26.47
Model: 103032
Breather - LS1 & 3800
This is a chrome top Breather Assembly with heavy duty
billet Aluminum base. Bayonet type lock attaches securely
to the valve cover. Used on the LS1 GM engine and Supercharged 3800
Series II engine. Bayonet twist-lock mounts securely and seals with
an O rin..
$46.00
Model: 102152
GTP Fuel Pump Hotwire KitThe Fuel Pump Hotwire Kit allows you to replace the stock, inadequate 18 gauge wire with a new 12 gauge feed using all OEM plug and play connectors! No wires to cut! This kit will increase the voltage at the fuel pump on average 2.5 volts. Make the most out of your aging fac..
$74.41
Model: 109062
Hi Speed Fan KIT GTP/GS 1997/2002Plug-and-Play Fan Harness overrides the ECU to control the coolant fan. Cooler engines produce more HP, and our fan kit gives you complete control. Sealed OEM relays, factory OEM wiring and connectors, Plug-and-Play operation, no wires to cut! Tiny switch mounted in ..
$105.01
Model: 108099
LS1 MAF to 3800 MAF PigtailOur 108099 Plug-in adapter is designed to adapt the current LS1 5-wire Mass Airflow Sensor to the GM 3800 Supercharged and NA engines, 1996-2002. Plug-in adapter has no provision for Airtemp Sensor, so only 3 of the 5 terminals on the LS1 MAF sensor are used. ..
$26.47
Model: 108125
MAF Adapter 3 pin w/ IAT to GTDesigned to facilitate the installation of a 5 wire WIDE pin spaced MAF (IE: 2006+ Z06) in a 3 wire MAF car (ie: 98 Camaro LS1). Break out is 6" long. Use with our IAT extensions (part numbers 109017 - 12", 109018 - 24" or 109019 - 36") for easy installation...
$26.47
Model: 108136
MAF/IAT Breakout - GT Series DenseTypically found on the 05/06 Pontiac GTO, C5 Allows the use of an external, relocated IAT sensor. Uses OEM and custom made connectors for a sealed plug-and-play and OEM fit and finish. Please look at the connectors pictured closely and verify against what is on your..
$26.47
Model: 108165
MAF/IAT Breakout GT Series
This is the WIDE GT connector. This connector is found on the G8, Modular MAF Corvette (such as the C6 Z06) with the BLACK MAF connector.
..
$26.47
Model: 108100
Mass Air/Air Temp. Adapters
Plug-And-Play adapter converts the 3-wire LT1 engine harness connector to plug directly into the 5-wire LS1 MAF sensor. Incorporates the AirTemp connector into the adapter to connect directly to the gray AirTemp sensor connector from the engine harness. ..
$31.57
Model: 109006
O2 Sensor Extension SQR 12" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47
Model: 109007
O2 Sensor Extension SQR 24" When installing aftermarket headers and cat-back systems in your vehicle, the oxygen sensor is frequently relocated, usually far enough away from the original wiring location that the connector cant be re-installed. You cannot cut and splice oxygen sensor wiring since th..
$26.47